Drag mechanism,Its material is Q235,45 and QT700-2,for the Scraper
Conveyor:
Concave tooth shape drag sprocket with large load capacity, guide
performance is good, eliminate off chain due to wear chain pitch
increasing phenomenon, to avoid the chain running deviation.
Drag wheel adopt plate structure, maintenance can be pulled out
from the shell of a complete set of institutions, when maintenance
it is convenient and fast to replace.
Drag chain wheel replacement:
When the sprocket badly worn cannot be guaranteed and the chain of
normal mesh, easy to take off the chain phenomenon, should be
timely replacement of a new sprocket. Sprocket use the fasteners
such as bolts and fixed on the wheel hub, to replace the former
should be off the chain. Note: the replacement of sprocket must be
replaced in pairs,it do not allow change the single section.
MGB series scraper conveyor is suitable for conveying coal ash
powder, particle materials innovation products. It can be widely
used in thermal power, building materials, chemical industry,
mining, metallurgy, machinery, etc. Mainly by the unit head, tail
units, driving mechanism, the standard section, scraper, chain and
other parts.
MGB series scraper conveyor is suitable for conveying coal ash
powder, particle materials innovation products. It can be widely
used in thermal power, building materials, chemical industry,
mining, metallurgy, machinery, etc. Mainly by the unit head, tail
units, driving mechanism, the standard section, scraper, chain and
other parts.
Model and Meanings:
Model: MGBC (M)-B×L
MGB: take the first letter of the Chinese meaning of the embedded
scraper i. e. Mai Gua Ban
C (M): C means the chain is circular chain, M means the chain is
Drop-forged rivet-less chain. If the C/M is omitted, it means the
chain is circular type.
B refer s to the width of the scraper, which includes sizes of
300mm, 400mm, 500mm, 600mm, 800mm, 1000m, and 1200mm.
L refers to the length of the conveying pass. (Unit: mm)
